...
Phoenix Parachutes: Soft Goods, Phoenix Drogue Parachute
Hermes III Parachute: Hermes III Drogue Parachute
Hermes II Deployment Bag: Hermes Main Deployment Bag
Hermes I Drogue: Hermes Disk Gap Band Drogue
General Parachute Info: Parachute Design & Fabrication, Parachute Inventory
Timeline:
1st meeting: choose deployment bag & parachute sizing
Lines material research: Zandra & Sydney & Annika
Parachute manufacturer research: Sophia
Deployment bag/cloth research: Hermanus, Jacky
Lines Diagram: Jenna
Testing methods: Claire
Failure modes: Cruz
2nd meeting: finished lines diagram, parachute manufacturer chosen, testing methods chosen
3rd meeting: lines sizing, parachute design, parachute manufacturing instructions, testing procedures
...
- Heavier (two separation systems vs one) and takes up more space
- No reliance on TDs
- Don't have to worry about main tangling while drogue is deployed
- How do we signal the dual deploy? (Wires don't swivel very easily, want to avoid having wires extend between deployment stages)
- Load bearing avionics bay? Put the avionics bay in between the two deployment mechanisms?
- Not all flight computers are created equal: put smol computers in the nose of each stage that are just there to actuate the first deployment
Sustainer (estimated weight: 15.8 lbs)
1 drogue: 18 inch diameter (approx 1.16 oz 18, 6.4 in^3 packing volume)
1 main: 48 inch diameterdiameter (approx 7.5 oz, 41.5 in^3 packing volume)
Booster (estimated weight: 103 lbs)
1 drogue: 36 inch diameter (approx 3.3 oz, 18 in^3 packing volume)
1 main: 96 inch diameter (approx 25 oz, 139.5 in^3 packing volume)
Goal terminal velocity: 30 ft/sec, main parachute Cd: 2.2
Research on parachute manufacturers:
Deployment
Multistage recovery system
Think about the snatch load - reduce snatch load by keeping it in a deployment bag or shell
Should have two sections - a section for the canopy and a section for the lines - to reduce tangling
Individual lines stored in individual sleeves to prevent tangling
****want lines first deployment
Could put the lines in a bag and put the canopy inside a sleeve which is stored in a protective flap
Material - fire-resistant Nomex (to shield parachute from heat of expulsion charge)
Drogue shell?
parachute liner as replacement?(Fruity chutes sells them lol)
simplified parachute bag; good for CO2 deployment?
Research into line materials:
Currently technora; will co2 have any effect on the lines?
Lines Diagram:
- Line Sizing Resources
- Hermes Webbing Line Sizing: Hermes Webbing Lengths
What we want to test:
Deployment and inflation behaviour of the parachute.
Stability of the parachute throughout the entire flight envelope.
Opening load of the parachute.
Tensile Testing Procedure: https://docs.google.com/document/d/1-n-A-MbSnujLylDCPT35ef-At09ltjjxZ-DWiKTpzdI/edit
- Webbing failure modes: Hermes Webbing Failure
- LINE TANGLING!!!!
- TD failures
- e-match shorting
- wet black powder or TD isn't pressure sealed so black powder can't combust
...