Trigger information stored in muDst
For W analysis I need the following :
- bXing7, full bXing48, 8bit-Spin
- 32triggerBits, offline trigger ID
- full DSM tree infor for the barrel: Layer 0,1,2, lastDsm
- full raw L2ResultArray (I can unpack details myself)
- BBC: TDC & ADC from 16 small tails
- ZDC: 3 tower ADC, 16 SMD ADC
VPD low threshold in QT->DSM
= yes in StVpdTriggerDetector
VPD high threshold in QT->DSM
= currently data is NOT stored in mudst
But hardware (signal splitter) is not here yet neither
VPD in TOF electronics
= I assume its in TOF mudst class... but you need to ask TOF experts.
'''Below is actual the code with names of variables as of 2006.'''
......
StTriggerData2005 trgAkio5(trgD, mRunNo);
//....................
mJetT->lastDsm= *(trgAkio5.getDsm3());
//....................
mJetT->tcuBits= trgAkio5.tcuBits();
mJetT->L1sum0=trgD->TrgSum.L1Sum[0];
mJetT->L2sum0=trgD->TrgSum.L2Sum[0];
mJetT->bx7=trgAkio5.bunchId7Bit();
mJetT->bx48=trgAkio5.bunchId48Bit();
mJetT->spin8=trgAkio5.spinBit() ;
// raw 48 bit bXing
mJetT->bXingHi=trgD->TrgSum.DSMdata.BCdata[3];
mJetT->bXingLo1=trgD->TrgSum.DSMdata.BCdata[10];
mJetT->bXingLo0=trgD->TrgSum.DSMdata.BCdata[11];
mJetT->bbcTimeDiff=trgAkio5.bbcTimeDifference();
mJetT->runId=mRunNo;
mJetT->eveId=mEveInp;
mJetT->token=trgAkio5.token();
int j;
// ETOW L0 DSM data
for(j=0;j<TrgJetTree::EpSize;j++)
// BTOW L0 DSM data
for(j=0;j<TrgJetTree::BpSize;j++)
//................. unpack L2Result[]....
int l2jetOff=trgAkio5.L2ResultsOffset(l2Dijet);
const unsigned int *l2res=trgD->TrgSum.L2Result;
for (int k=0;k<32;k++) printf("k=%2d val=0x%04x\n",k,l2res[k]);
L2jetResults2006 *jetRes= ( L2jetResults2006 *) &l2res[l2jetOff];
L2jetResults2006_print(jetRes);
unsigned char cSum=L2jetResults2006_doCheckSum(jetRes);
assert(cSum==0);
//............BBC
int i;
for(i=0;i<TrgJetTree::mxBbc;i++) {
int ew=0;
for(ew=0;ew<TrgJetTree::EastWest; ew++)
}
//.............ZDC
int ew=0;
for(ew=0;ew<TrgJetTree::EastWest; ew++) {
for(i=0;i<TrgJetTree::mxZdc;i++)
mJetT->zdcAdcSum[ew]=trgAkio5.zdcUnAttenuated((StBeamDirection)ew);
mJetT->zdcTdc[ew]=trgAkio5.zdcTDC((StBeamDirection)ew);
}
//............ZDC-SMD vs. raw channel
for(i=0; i<TrgJetTree::mxZdcSmdRaw; i++)
for(i=0; i<-16; i++)