Description

This article contains instructions for installing the printer on Windows 10.

Video Instructions

A video tutorial for installing the printer can be found here.

Before beginning, ensure you are properly connected to the MIT network.

Click here to download the driver.
Navigate to the downloaded .zip in your files and extract it using 7-Zip (right-click > 7-Zip > Extract Here).
Open extracted folder (most-likely called Driver) and run Setup64 application.
Agree to the software end user license agreement, then select Install printers/MFPs.
Do not allow the installer to search for printers/MFPs. After clicking cancel, select Specify manually.
In Network, select IPv4, IPv6 address/IP Host name.
In this field, type 'msred-copier.mit.edu', then click Next.
From the drop-down menu, select Konica Minolta C368Series, then click Next.
Click Install.
After the installation has completed, open your computer's control panel.
Navigate to your hardware devices and find the printer.
Right click on the device and choose printer properties (note that this is not the same as properties).
Select the Ports tab.
Click Configure Port...
Ensure that SNMP Status is disabled.
If problems persist, contact IT personnel at creit@mit.edu.