Overview
Hermes is the team's current project, intended to prove our ability to build a rocket capable of flight at multiple times the speed of sound to altitudes close to 100kft.
Flight History:
| Flight | Vehicle | Motor | Launch Site | Date | Result |
|---|---|---|---|---|---|
| Hermes 1 | OW-152-4G #3 | Friends of Amateur Rocketry | July 21, 2018 | Success | |
| Hermes Flight 2 | Hermes 2 | P9100 | Friends of Amateur Rocketry | July 6, 2019 | Pending |
(March 2019 CAD)
Link to integration procedure: Hermes 1 Integration Procedure
Link to Concept Design Review: Concept Design Review.pptx
Leadership
2017-2018
President | VP | Treasurer | Social Chair | Pub. Chair |
|---|---|---|---|---|
| Charlie G | Andrew R | Isaac P | Maddie J | Joanna Z |
| Structures | Payload | Recovery | Propulsion | Avionics |
| Matthew C | Maddie G | Maddie J | Sam A | Josef B |
2018-2019
President | VP | Treasurer | Chief Engineer | Pub. Chair |
|---|---|---|---|---|
Andrew A (Fall) Julia G (Spring) | Katie K | Julia G (Fall) Cici M (Spring) | Andrew R | Charlie G (Fall + Spring) Shannon C (Spring) |
| Structures | Payload | Recovery | Propulsion | Avionics |
| Dayna E | Juan S | Jakob C | Ethan S | Zack H |
Subsystems
Preliminary Design Review: Preliminary Design Review.pptx
Recovery System
The Hermes recovery system is a piston-actuated, single separation-dual deploy architecture.
Propulsion System
Hermes Propulsion System (8-grain) is an eight-grain custom solid rocket motor that will provide propulsion for the vehicle.
Structures System
 | |
| June 2017 - Present | |
| Liftoff Mass: 177 lbs | |
| Propellant Mass: 74 lbs | |
| Maximum Velocity: ~Mach 3 | |
| Maximum Apogee: ~ 80,000ft | |
| Maximum Acceleration: |
Vehicles
Hermes 1Hermes I is the first build of a flight-ready Hermes rocket. The structures team delivered an all-composite minimum diameter fin can. Andrew A. constructed a hexagon Avionics Tower, which wrapped around the recovery team's high-altitude-ready piston deployment system. The propulsion subteam prepared and proved a 4 grain 152mm diameter motor for the flight. The rocket was designed to work with an 70KNs motor but was modified to accommodate the 35KNs motor it flew on by putting a motor retention bulkhead into the middle of the air frame. This rocket flew Hermes Flight 1 before being retired to the Rocket Garden in the Unified Lounge. Responsible Engineers Listed Here. Mass Budget here. This rocket was originally envisaged as flying in the 'Unlimited Category' at IREC 2018. Deliverables below: |  |
Hermes 2Hermes II is an iterative improvement on the Hermes I design, intended to eventually serve as a first stage for a spaceshot. The airframe has seen significant upgrades since the Hermes flight, including a simplified avionics bay design, ablative leading edges on the fins, and a shift to a sub-minimum diameter design. More of the rocket structure will be built by the team compared to Hermes I, including the nosecone. The rocket will fly on a 74 KNs motor. |  |