You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Assembly Procedures for the Hermes II Avionics Tower



  1. Independent Assembly of the Tower

    1. Attach all electronics to the outer face plates

      1. Screw down all flight electronics to their respective places

        1. Pyxida center

        2. Telemega left

        3. MARSA right

      2. Wire electrical leads to the flight hardware

      3. Assemble the switch and secure it into place

        1. Attach the flight hardware electrical leads to the switch

      4. Attach the battery holders to the two outer face plates

        1. Run the power cables to near the battery holders and fix them down using (TBD)

      5. Attachment of Cameras by securing the holders to the Camera face plates

  • No labels