Return to Sample Master List

Sample Fabrication

Substrate

p-Si(111), ρ = 1000 Ω-cm

...

• 6/4/2012           UV-VIS reflection measurement
  20120604 UV-VIS reflection Au 4a.Sample.Raw.csv 
   
• 6/5/2012           UV-VIS transmission measurement
  20120605 UV-VIS transmission Au 4a.Sample.Raw.csv 
   
• 6/11/2012         Laser cut into 7x7 mm sample, solvent clean
  Debris due to laser cut observed
  On 6/13/2012, found out that this laser cutting procedure raises a normal silicon sample temperature high enough to hard-bake the photoresist, so it could have initiated gold diffusion on 4a.

• 6/20/2012         SEM and EBSD
  Spot 4a 70 deg tilt lowmag.tif
  Spot 4a 250kx faults and dirt.tif
  Spot 4a 260kx faults and dirt.tif
  Spot 4a 70 deg tilt 75kx.tif
  Spot 4a 70 deg tilt 130kx.tif
• 7/10/2012         Retook UV-VIS after lamp change
  20120709 Au UV-VIS.xlsx

Sample 4B

• 6/11/2012         Laser cut into 7x7 mm sample, solvent clean
  Debris due to laser cut observed
  On 6/13/2012, found out that this laser cutting procedure raises a normal silicon sample temperature high enough to hard-bake the photoresist, so it could have initiated gold diffusion on 4b.

Sample 4C

• 6/5/2012           Raman measurements
  Sample 4C raman.xlsx