...
Sustainer (estimated weight: 15.8 lbs)
1 drogue: 18 inch diameter
1 main: 48 inch diameter
Booster (estimated weight: 103 lbs)
1 drogue: 36 inch diameter
1 main: 96 inch diameter
Goal terminal velocity: 30 ft/sec, main parachute Cd: 2.2
Research on parachute manufacturers:
Deployment
Multistage recovery system
Think about the snatch load - reduce snatch load by keeping it in a deployment bag or shell
Should have two sections - a section for the canopy and a section for the lines - to reduce tangling
Individual lines stored in individual sleeves to prevent tangling
****want lines first deployment
Could put the lines in a bag and put the canopy inside a sleeve which is stored in a protective flap
Material - fire-resistant Nomex (to shield parachute from heat of expulsion charge)
Drogue shell?
parachute liner as replacement?(Fruity chutes sells them lol)
simplified parachute bag; good for CO2 deployment?
Research into line materials:
Currently technora; will co2 have any effect on the lines?
Lines Diagram:
- Line Sizing Resources
- Hermes Webbing Line Sizing: Hermes Webbing Lengths
- Webbing failure modes: Hermes Webbing Failure
- LINE TANGLING!!!!
- TD failures
- e-match shorting
- wet black powder or TD isn't pressure sealed so black powder can't combust
...