Masks:
To get a plastic mask (min feature size = 10um), you just have to email the file with the design of the mask to the printing
company below:
- Printing company:
CAD/Art Services, Inc.
87509 Oberman Lane, Bandon, OR 97411
Tel: 541-347-5315
Fax#: 541-347-6810
email: cas@outputcity.com
They accept .dxf files. A simple program to prepare dxf file is attached (clewin3.rar). An example of a mask is also attached: mask.dxf.
Clean Room:
In order to get access to MTL (http://mtlweb.mit.edu.ezproxyberklee.flo.org/index.html services), you must register using the MUMMS registration form (http://mtlweb.mit.edu.ezproxyberklee.flo.org/services/fabrication/register.html).
Before you start registration, please make sure that:
-You have a MIT email address.
-You know the MTL services to which you need access (most likely EML).
-You have an MIT account number (cost object).
In the MUMMS registration:
- Select: I need access to the main fabrication facilities.
- Check: Access to EML facilities.
- Select: Polymers under Research Material.
- Provide Cost object, Supervisor name, Kerberos name.
After that you have to complete the following prerequisites:
- CHP Form Sign Off - You have signed off on the CHP agreement.
- Computer account creation approval - Your compute account has been approved by MTL staff. Note, however, that you cannot log into MTL computers unless you have an active Compute Access service.
- MTL Safety Quiz - You have completed your EHS MTL Safety Quiz requirements. To view your EHS status, go to the EHS Training Page.
- Managing Hazardous Waste - Your EHS Managing Hazardous Waste compliance is out of date. To view your EHS status, go to the EHS Training Page.
- Chemical Hygiene - You have completed your EHS Chemical Hygiene requirements. To view your EHS status, go to the EHS Training Page.
- Hydrofluoric Acid - You have completed your EHS Hydrofluoric Acid requirements. To view your EHS status, go to the EHS Training Page.