Page History

From the Checkout Project from SVN repository panel, select Create a new repository location as shown in the following panel.

!setupWarTemplate004.jpg!

When satisfied that everything is correct, click Next.

In the Enter Repository Location Information panel do the following:
for the

URL:field enter:

    svn+ssh://svn.mit.edu/es-projectscommon-services-framework/es-project-template/war-template/trunk

For the Label, select: use the repository URL as the label
For the Authentication, enter your User name and password.

!setupWarTemplate006.jpg!

When satisfied that everything is correct, click Next.

The Repository Location Properties panel is a warning panel.

!setupWarTemplate007.jpg!

You do not want to normalize the URL!
click No.

In the Select Resourcepanel, select

    svn+ssh://svn.mit.edu/es-common-services-projectsframework/es-project-template/war-template/trunk

as shown in the following panel:

!setupWarTemplate008.jpg!

When satisfied that everything is correct, click Finish.

In the Check Out As panel, select Check out as a project with the name specified: as shown in the following panel.

!setupWarTemplate010.jpg!

When satisfied that everything is correct, click Finish.

Your Eclipse - Project Explorer View should now look similar to the following:

!setupWarTemplate011.jpg!

Right click on the war-template project and select Team > Disconnect
When the following Confirm Disconnect from SVN panel is displayed, select Also delete the SVN meta-information from the file system.

!setupWarTemplate012.jpg!

When satisfied that everything is correct, click Yes.

Open the Eclipse Project Explorer View.  The view should look as follows:

!setupWarTemplate014.jpg!

Right click on the war-template project and select Rename....
Replace war-template with the short project acronym that you have previously selected.  If you have not selected a short project acronym, please go to Selecting names for your project before continuing.

*Note*:  If you haven't already do so, You might want to append a *-web* to the *short project acronym* to denote that this is the web component of your project.

For example: If my short project acronym was att, then my panel would look like the following:

!setupWarTemplate016.jpg!

When satisfied that everything is correct, click OK.

The Eclipse - Project Explorer View should look similar to the following:

!setupWarTemplate018.jpg!

Right click on the renamed project and select Configure > Convert to Maven Project
Expand your project and it should look similar to the following:

!setupWarTemplate019.jpg!

Right click on the renamed project and select Team > Share Project...
Select SVN as shown below:

!setupWarTemplate020.jpg!

When satisfied that everything is correct, click Next.

Select Create a new repository location as shown below:

!setupWarTemplate022.jpg!

When satisfied that everything is correct, click Next.

Enter a desired SVN URL for your project.
The SVN repository that you should use is svn+ssh://svn.mit.edu/es-projects/ followed by the SVN project identifier that you had previously selected.  If you have not selected a SVN project identifier, please go to Selecting names for your project before continuing.
For example:

If my *SVN project identifier* is *academic-att*, then the SVN URL would be:
{code}
svn+ssh://svn.mit.edu/es-projects/academic-att.
{code}
This would mean that my jar project would be created under the *es-projects/academic-att* directory in the SVN repository.  This is shown
in the following panel:

!setupWarTemplate024.jpg!

Don't forget to enter your User name and Password,
When satisfied that everything is correct, click Next.

When the following panel is display notifying you that a new SVN entry will be created:

!setupWarTemplate026.jpg!

When satisfied that everything is correct, click OK.

Do the following:

* In the *Advanced Mode* section, select *Use project name*.
* In the *Project Repository Layout* section, select *Use single project layout*.
* Check *Use Subversion recommended layout ('trunk', 'branches' and 'tags')* check box.

The panel should be as illustrated in the following panel:

!setupWarTemplate028.jpg!

When satisfied that everything is correct, click Next.

Nothing to do here.  This is an information panel similar to the following panel:

!setupWarTemplate030.jpg!

When satisfied that everything is correct, click Finish.

When a panel similar to the one below is display, enter a comment.
This is the initial SVN check-in (svn commit) for the WAR project:

!setupWarTemplate032.jpg!

When satisfied that everything is correct, click OK.

When the SVN commit has completed, the Eclipse - Project Explorer View should look similar to the following.

!setupWarTemplate034.jpg!

.xml for editing and change the following lines substituting your short project acronym for projectName.

There are 6 occurances of projectNamethat have to be changed.

<value>file:${user.dir}/projectName/projectName.properties</value>
<value>file:${user.home}/projectName.properties</value>
<value>file:${user

.dir}/projectName/projectName.

properties</

value>
<value>file:${user.home}/projectName.properties</value>

When you have made all the changes, the lines you have changed should look similar to the following:

<value>file:${user.dir}/att/att.properties</value>
<value>file:${user.home}/att.properties</value>
<value>file:${user.dir}/att/att.

properties</

value>
<value>file:${user.home}/att

.properties</value>

In the above example, my short project acronym was att so I replaced projectName with att and ProjectName with Att.
When you are satisifed with the changes, save and close the file.

• For Tomcat 7 implementations:
  There are 4 occurances of projectNamethat

  For OC4J implementations:
  Replace ${logs.dir}/projectName with log and the 2 remaining occurances of projectName

  have to be changed.

  Code Block
  <param name="File" value="${logs.dir}/projectName/projectName.log" /> <param name="File" value="${logs.dir}/projectName/hbn-projectName.log" />

  When you have made all the changes, the lines you have changed should look similar to the following:

  Code Block
  <param name="File" value="log/projectName${logs.dir}/att/att.log" /> <param name="File" value="log${logs.dir}/att/hbn-projectNameatt.log" />

  In the above example, my short project acronym was att so I replaced projectName with att and ProjectName with Att.

  When you are satisifed with the changes, save and close the file.

• For OC4J implementations:
  Replace ${logs.dir}/projectName with log and the 2 remaining occurances of projectNamehave to be changed.

  Code Block

• <param name="File" value="${logs.dir}/projectName/projectName.log" /> <param

• name="File" value="${logs.dir}/projectName/hbn-projectName.log" />

  When you have made all the changes, the lines you have changed should look similar to the following:

  Code Block

• <param name="File" value="log/att.log" /> <param

• name="File" value="log/hbn-att.log" />

  In the above example, my short project acronym was att so

• I replaced projectName with att

• and ProjectName with Att.
  
  When you are satisifed with the changes, save and close the file.

Open the

applicationContext-projectName.xml for editing and change the following lines substituting your short project acronym for projectName.
There are

3 occurances of projectNamethat have to be changed.

    <param name="File" value="${logs.dir}/projectName/projectName.log<import resource="classpath*:applicationContext-projectName-component-scan.xml" />
    <param name="File" value="${logs.dir}/projectName/hbn-projectName.log<import resource="classpath*:applicationContext-projectName-config.xml" />
<import resource="classpath*:applicationContext-projectName-security-spring.xml" />

When you have made all the changes, the lines you have changed should look similar to the following:

    <param name="File" value="${logs.dir}/att/att.log<import resource="classpath*:applicationContext-att-component-scan.xml" />
    <param name="File" value="${logs.dir}/att/hbn-att.log<import resource="classpath*:applicationContext-att-config.xml" />
<import resource="classpath*:applicationContext-att-security-spring.xml" />

In the above example, my short project acronym was att so

i replaced projectName with att.*.
When you are satisifed with the changes, save and close the file.

Open the servlet.xml for editing and change the following lines substituting your short project acronym for projectName.
There is 1 occurance of projectNamethat has to be changed.

    <context:component-scan base-package="edu.mit.projectName.web">

When you have made the change, the line you have changed should look similar to the following:

    <context:component-scan base-package="edu.mit.att.web">

In the above example, my short project acronym was att so I replaced projectName with att.*.
When you are satisifed with the changes, save and close the file.

From the Project Explorer View, rename each of the following files, substituting your short project acronym for projectName.
There are 4 files that have to be renamed.

    applicationContext-projectName-component-scan.xml
    applicationContext-projectName-config.xml
    applicationContext-projectName-security-spring.xml
    applicationContext-projectName.xml

When you have made all the changes, the file names that you have changed should look similar to the following:

    applicationContext-att-component-scan.xml
    applicationContext-att-config.xml
    applicationContext-att-security-spring.xml
    applicationContext-att.xml

In the above example, my short project acronym was att so I replaced projectName with att.*.
Your Project Explorer Viewshould look similar to the following:

!customizeWar006.jpg!

In the Project Explorer View, expand src/main/java.
Rename the edu.mit.projectName.web package, substituting your short project acronym for projectName.
Your Project Explorer Viewshould look similar to the following:

!customizeWar008.jpg!

In the Project Explorer View, expand src/test/resources.
Open the applicationContext-csf-unit-tests-default.xml for editing and change the following lines substituting your project name for projectName.
There are 3 occurances of projectNamethat have to be changed.

    <import resource="classpath*:applicationContext-csf-projectName.xml" />
    <import resource="classpath*:applicationContext-projectName.xml" />
    <import resource="classpath*:applicationContext-projectName-config-test.xml" />

When you have made all the changes, the lines you have changed should look similar to the following:

    <import resource="classpath*:applicationContext-csf-att.xml" />
    <import resource="classpath*:applicationContext-att.xml" />
    <import resource="classpath*:applicationContext-att-config-test.xml" />

In the above example, my short project acronym was att so I replaced projectName with att.*.
When you are satisifed with the changes, save and close the file.

In the Project Explorer View, expand src/test/resources.
Open the applicationContext-projectName-config-test.xml for editing and change the following lines substituting your project name for projectName.
There are 2 occurances of projectNamethat have to be changed.

    <value>classpath:projectName-test.properties</value>
    <value>classpath:projectName-test.properties</value>

When you have made all the changes, the lines you have changed should look similar to the following:

    <value>classpath:att-test.properties</value>
    <value>classpath:att-test.properties</value>

In the above example, my short project acronym was att so I replaced projectName with att.*.
When you are satisifed with the changes, save and close the file.

From the Project Explorer View, rename the following file, substituting your short project acronym for projectName.
There are 2 files that have to be renamed.

    applicationContext-projectName-config-test.xml
    projectName-test.properties

When you have made all the changes, the file names that you have changed should look similar to the following:

    applicationContext-att-config-test.xml
    att-test.properties

In the above example, my short project acronym was att so I replaced projectName with att.*.

• There are 7 occurances of projectNamethat have to be changed.

  Code Block
  <display-name>projectName</display-name> classpath*:applicationContext-csf-projectName.xml, classpath*:applicationContext-projectName.xml <servlet-name>projectName</servlet-name> <servlet-name>projectName</servlet-name> <servlet-name>projectName</servlet-name> <servlet-name>projectName</servlet-name>

  When you have made all the changes, the lines you have changed should look similar to the following:

  Code Block
  <display-name>att</display-name> classpath*:applicationContext-csf-att.xml, classpath*:applicationContext-att.xml <servlet-name>att</servlet-name> <servlet-name>att</servlet-name> <servlet-name>att</servlet-name> <servlet-name>att</servlet-name>

  In the above example, my short project acronym was att so I replaced projectName with att.*.

• Find the following line and change MitsisDSfor your project's JNDI name.

  Code Block
  <res-ref-name>jdbc/MitsisDS</res-ref-name>

  
  When you are satisifed with the changes, save and close the file.