Page History

The SVN repository for the jar template has moved to svn+ssh://svn.mit.edu/es-common-services-framework/es-project-template/jar-template/trunk.
Please note that the dialog screen shots in Section 1-3, 1-5, 1-7 and 1-13 shows the old SVN location of the war-template.

Section 1: Creating the project war component using the war-template

• This setup assumes that you have completed the Workstation configuration as found on the CSF Home - Getting Started tab.
  If you have not completed the Workstation configuration , please do so now .
  
  Please read the OVERVIEW before continuing.

1. Run Eclipse.  Go to File > New > Other....
   Scroll down to

   Maven

   SVN and expand then select

   Checkout Maven Projects

   Project from

   SCM

   SVN as shown in the following panel.

   indent
   2 2
   !setupWarTemplate002.jpg!

   When satisfied that everything is correct, click Next.

2. From the Checkout Project from SVN repository panel, select Create a new repository location as shown in the following panel.

   indent
   2 2
   !setupWarTemplate004.jpg!

   When satisfied that everything is correct, click Next.

3. In the Enter Repository Location Information panel do the following:
   for the URL:field enter:

   Code Block
   svn+ssh://svn.mit.edu/es-common-services-framework/es-project-template/war-template/trunk

   For the Label, select: use the repository URL as the label
   For the Authentication, enter your User name and password.

   indent
   2 2
   !setupWarTemplate006.jpg!

   When satisfied that everything is correct, click Next.

4. The Repository Location Properties panel is a warning panel.

   indent
   2 2
   !setupWarTemplate007.jpg!

   You do not want to normalize the URL!
   click No.

5. In the Select Resourcepanel, select

   Code Block

   SCM URL: dropdown, select snv.
   Uncheck Checkout All Projects.
   The URL for the war-template is :

   Code Block
   svn+ssh://svn.mit.edu/es-common-services-projectsframework/es-project-template/war-template/trunk

   Copy and pasted the above URL into the SCM URL: input field.
   When done the panel should be identical

   as shown in the following panel:

   indent
   2 2
   !setupWarTemplate008.jpg!

   When satisfied that everything is correct, click Finish.

6. In the Check Out As panel, select Check out as a project with the name specified: as shown in the following panel.

   indent
   2 2
   !setupWarTemplate010.jpg!

   When satisfied that everything is correct, click Finish.

7. Your Eclipse - Project Explorer View should now look similar to the following:

   indent
   2 2
   !setupWarTemplate011.jpg!

8. Right click on the war-template project and select Team > Disconnect
   When the following Confirm Disconnect from SVN panel is displayed, select Also delete the SVN meta-information from the file system.

   indent
   2 2
   !setupWarTemplate012!setupWarTemplate004.jpg!

   When satisfied that everything is correct,

   click Next.
   If you want the change the Workspace location, uncheck the Use default Workspace location and enter the path to the desired workspace.

   click Yes.

9. Open the Eclipse Project Explorer View.  The view should look as follows:

   indent
   2 2
   !setupWarTemplate014.jpg!

   Right click on the war-template project and select Rename....
   Replace war-template with the short project acronym that you have previously selected.  If you have not selected a short project acronym, please go to Selecting names for your project before continuing.

   indent
   2 2
   *Note*:  If you haven't already do so, You might want to append a *-web* to the *short project acronym* to denote that this is the web component of your project.

   
   For example: If my short project acronym was att, then my panel would look like the following:

   indent
   2 2
   !setupWarTemplate016.jpg!

   When satisfied that everything is correct, click OK.

10. The Eclipse - Project Explorer View should look similar to the following:

    indent
    2 2
    !setupWarTemplate018.jpg!

11. Right click on the renamed project and select Configure > Convert to Maven Project
    Expand your project and it should look similar to the following:

    indent
    2 2
    !setupWarTemplate019.jpg!

12. Right click on the renamed project and select Team > Share Project...
    Select SVN as shown below:

    indent
    2 2
    !setupWarTemplate020.jpg!

    When satisfied that everything is correct, click Next.

13. Select Create a new repository location as shown below:

    indent
    2 2
    !setupWarTemplate022.jpg!

    When satisfied that everything is correct, click Next.

14. Enter a desired SVN URL for your project.
    The SVN repository that you should use is svn+ssh://svn.mit.edu/es-projects/ followed by the SVN project identifier that you had previously selected.  If you have not selected a SVN project identifier, please go to Selecting names for your project before continuing.
    For example:

    indent
    1 1
    If my *SVN project identifier* is *academic-att*, then the SVN URL would be: {code} svn+ssh://svn.mit.edu/es-projects/academic-att. {code} This would mean that my jar project would be created under the *es-projects/academic-att* directory in the SVN repository.  This is shown in the following panel:

    indent
    2 2
    !setupWarTemplate024.jpg!

    Don't forget to enter your User name and Password,
    When satisfied that everything is correct, click Next.

15. When the following panel is display notifying you that a new SVN entry will be created:

    indent
    2 2
    !setupWarTemplate026!setupWarTemplate006.jpg!

    When satisfied that everything is correct, click

    Finish.
    

    OK.

16. Do the following:

    indent
    1 1
    * In the *Advanced Mode* section, select *Use project name*. * In the *Project Repository Layout* section, select *Use single project layout*. * Check *Use Subversion recommended layout ('trunk', 'branches' and 'tags')* check box.

    The panel should be as illustrated in the following panel:

    indent
    2 2
    !setupWarTemplate028.jpg!

    When satisfied that everything is correct, click Next.

17. Nothing to do here.  This is an information panel similar to the following panel:

    Verify the Maven Project that is being imported. The Import Maven Projects panel should be identical to the following panel.

    indent
    2 2
    !setupWarTemplate008setupWarTemplate030.jpg!

    When satisfied that everything is correct, click Finish.

1. When a panel similar to the one below is display, enter a comment.
   This is the initial SVN check-in (svn commit) for the WAR project:

   indent
   2 2
   !setupWarTemplate032.jpg!

   When satisfied that everything is correct, click OK.

2. When the SVN commit has completed, the Eclipse - Project Explorer View should look similar to the following.

   indent
   2 2
   !setupWarTemplate034.jpg!

Creating the project war component using the war-template is now complete.

Section 2: Customizing the project WAR

{color:red}Please read the [*OVERVIEW* | #overview] before continuing.{color}

1. Run Eclipse.  From the Project Explorer View, open the Maven WAR project that you want to customize.
   Your Project Explorer View should look similar to the following:

   indent
   2 2
   !customizeWar002.jpg!

2. Expand your project, then expand src/main/resources.
   Your Project Explorer View should look similar to the following:

   indent
   2 2
   !customizeWar004.jpg!

3. Open the applicationContext-projectName-config.xml for editing and change the following lines substituting your short project acronym for projectName.
   There are 6 occurances of projectNamethat have to be changed.

   Code Block
   <value>file:${user.dir}/projectName/projectName.properties</value> <value>file:${user.home}/projectName.properties</value> <value>file:${user.dir}/projectName/projectName.properties</value> <value>file:${user.home}/projectName.properties</value>

   When you have made all the changes, the lines you have changed should look similar to the following:

   Code Block
   <value>file:${user.dir}/att/att.properties</value> <value>file:${user.home}/att.properties</value> <value>file:${user.dir}/att/att.properties</value> <value>file:${user.home}/att.properties</value>

   In the above example, my short project acronym was att so I replaced projectName with att and ProjectName with Att.
   When you are satisifed with the changes, save and close the file.

4. Open the log4j.xml for editing and change the following lines substituting your short project acronym for projectName.
   
   

   • For Tomcat 7 implementations:
     There are 4 occurances of projectNamethat have to be changed.

     Code Block
     <param name="File" value="${logs.dir}/projectName/projectName.log" /> <param name="File" value="${logs.dir}/projectName/hbn-projectName.log" />

     When you have made all the changes, the lines you have changed should look similar to the following:

     Code Block
     <param name="File" value="${logs.dir}/att/att.log" /> <param name="File" value="${logs.dir}/att/hbn-att.log" />

     In the above example, my short project acronym was att so I replaced projectName with att and ProjectName with Att.

   • For OC4J implementations:
     Replace ${logs.dir}/projectName with log and the 2 remaining occurances of projectNamehave to be changed.

     Code Block
     <param name="File" value="${logs.dir}/projectName/projectName.log" /> <param name="File" value="${logs.dir}/projectName/hbn-projectName.log" />

     When you have made all the changes, the lines you have changed should look similar to the following:

     Code Block
     <param name="File" value="log/att.log" /> <param name="File" value="log/hbn-att.log" />

     In the above example, my short project acronym was att so I replaced projectName with att and ProjectName with Att.
     
     When you are satisifed with the changes, save and close the file.

5. Open the applicationContext-projectName.xml for editing and change the following lines substituting your short project acronym for projectName.
   There are 3 occurances of projectNamethat have to be changed.

   Code Block
   <import resource="classpath*:applicationContext-projectName-component-scan.xml" /> <import resource="classpath*:applicationContext-projectName-config.xml" /> <import resource="classpath*:applicationContext-projectName-security-spring.xml" />

   When you have made all the changes, the lines you have changed should look similar to the following:

   Code Block
   <import resource="classpath*:applicationContext-att-component-scan.xml" /> <import resource="classpath*:applicationContext-att-config.xml" /> <import resource="classpath*:applicationContext-att-security-spring.xml" />

   In the above example, my short project acronym was att so i replaced projectName with att.*.
   When you are satisifed with the changes, save and close the file.

6. Open the servlet.xml for editing and change the following lines substituting your short project acronym for projectName.
   There is 1 occurance of projectNamethat has to be changed.

   Code Block
   <context:component-scan base-package="edu.mit.projectName.web">

   When you have made the change, the line you have changed should look similar to the following:

   Code Block
   <context:component-scan base-package="edu.mit.att.web">

   In the above example, my short project acronym was att so I replaced projectName with att.*.
   When you are satisifed with the changes, save and close the file.

7. From the Project Explorer View, rename each of the following files, substituting your short project acronym for projectName.
   There are 4 files that have to be renamed.

   Code Block
   applicationContext-projectName-component-scan.xml applicationContext-projectName-config.xml applicationContext-projectName-security-spring.xml applicationContext-projectName.xml

   When you have made all the changes, the file names that you have changed should look similar to the following:

   Code Block
   applicationContext-att-component-scan.xml applicationContext-att-config.xml applicationContext-att-security-spring.xml applicationContext-att.xml

   In the above example, my short project acronym was att so I replaced projectName with att.*.
   Your Project Explorer Viewshould look similar to the following:

   indent
   2 2
   !customizeWar006.jpg!

8. In the Project Explorer View, expand src/main/java.
   Rename the edu.mit.projectName.web package, substituting your short project acronym for projectName.
   Your Project Explorer Viewshould look similar to the following:

   indent
   2 2
   !customizeWar008.jpg!

9. In the Project Explorer View, expand src/test/resources.
   Open the applicationContext-csf-unit-tests-default.xml for editing and change the following lines substituting your project name for projectName.
   There are 3 occurances of projectNamethat have to be changed.

   Code Block
   <import resource="classpath*:applicationContext-csf-projectName.xml" /> <import resource="classpath*:applicationContext-projectName.xml" /> <import resource="classpath*:applicationContext-projectName-config-test.xml" />

   When you have made all the changes, the lines you have changed should look similar to the following:

   Code Block
   <import resource="classpath*:applicationContext-csf-att.xml" /> <import resource="classpath*:applicationContext-att.xml" /> <import resource="classpath*:applicationContext-att-config-test.xml" />

   In the above example, my short project acronym was att so I replaced projectName with att.*.
   When you are satisifed with the changes, save and close the file.

10. In the Project Explorer View, expand src/test/resources.
    Open the applicationContext-projectName-config-test.xml for editing and change the following lines substituting your project name for projectName.
    There are 2 occurances of projectNamethat have to be changed.

    Code Block
    <value>classpath:projectName-test.properties</value> <value>classpath:projectName-test.properties</value>

    When you have made all the changes, the lines you have changed should look similar to the following:

    Code Block
    <value>classpath:att-test.properties</value> <value>classpath:att-test.properties</value>

    In the above example, my short project acronym was att so I replaced projectName with att.*.
    When you are satisifed with the changes, save and close the file.

11. From the Project Explorer View, rename the following file, substituting your short project acronym for projectName.
    There are 2 files that have to be renamed.

    Code Block
    applicationContext-projectName-config-test.xml projectName-test.properties

    When you have made all the changes, the file names that you have changed should look similar to the following:

    Code Block
    applicationContext-att-config-test.xml att-test.properties

    In the above example, my short project acronym was att so I replaced projectName with att.*.

12. In the Project Explorer View, expand src/main/webapp/WEB-INF.
    Open the web.xml for editing and change the following lines substituting your short project acronym for projectName.
    
    

    • There are 7 occurances of projectNamethat have to be changed.

      Code Block
      <display-name>projectName</display-name> classpath*:applicationContext-csf-projectName.xml, classpath*:applicationContext-projectName.xml <servlet-name>projectName</servlet-name> <servlet-name>projectName</servlet-name> <servlet-name>projectName</servlet-name> <servlet-name>projectName</servlet-name>

      When you have made all the changes, the lines you have changed should look similar to the following:

      Code Block
      <display-name>att</display-name> classpath*:applicationContext-csf-att.xml, classpath*:applicationContext-att.xml <servlet-name>att</servlet-name> <servlet-name>att</servlet-name> <servlet-name>att</servlet-name> <servlet-name>att</servlet-name>

      In the above example, my short project acronym was att so I replaced projectName with att.*.

    • Find the following line and change MitsisDSfor your project's JNDI name.

      Code Block
      <res-ref-name>jdbc/MitsisDS</res-ref-name>

      
      When you are satisifed with the changes, save and close the file.

13. Commit all changes to the SVN repository.

Customizing the project WAR is now complete.

Section 3: Customizing the project WAR pom.xml

{color:red}Please read the [*OVERVIEW* | #overview] before continuing.{color}

1. Run Eclipse.  From the Project Explorer View, open the Maven WAR project that you want to customize.
   Expand your project and open the project's pom.xml for editing.
   Select the pom.xml tab.
   You should have a display similar to the following panel.  From time to time the war-template is updated and, as a result, the Configuration Instructionsare changed.  The instructions found in the pom.xml will ALWAYS be up-to-date and may differ from what is display in the panel below.

   indent
   2 2
   !pomXml002.jpg!

   Follow the Configuration Instructions that are provided in the pom.xml.
   When you are satisfied with the changes that you have made, save the changes and close the file.

2. Commit the changes to the SVN repository.

Customizing the project WAR pom.xml is now complete.

Section 4: One final thing to do

There may have been changes made to the WAR template that are not reflected in the above documentation.
The final task that must be done is to search the entire project for any occurance of projectName.
Open any file that contain projectName for editing and change projectName to your short project acronym.

One final thing to do is now complete.