Versions Compared

Old Version 90

changes.mady.by.user David E Tanner

Saved on

compared with

New Version 91

changes.mady.by.user David E Tanner

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel

Anchor
overview
overview

OVERVIEW

To setup the development environment for working with the mit-release-plugin for MOVES, there are 3 steps that must be completed.  These 3 steps are:

  • Step 1:
    Reconfigure the POM.XML for the mit-release-plugin-parent and it's children.
    There is nothing new here and you should know how to do the above relative to the IDE that you are using.
  • Step 2:
    Reconfigure the POM.XML for the sais-moves-web Maven project.
    Again, there is nothing new here and you should know how to do the above relative to the IDE that you are using.
  • Step 3:
    This section deals with creating and configuring step explains how to setup the MOVES Development Environment.
    It explains how to obtain and configure the Moves properties files as well as how to construct and configure the directory structure that is used by MOVESMoves.

It should take you approximately 15 - 20 minutes to complete all 3 steps.

...

Panel

Anchor
The sais-moves-web Maven Project Reconfiguration
The sais-moves-web Maven Project Reconfiguration

Step 2: The sais-moves-web Maven Project Reconfiguration

  1. Check-out the maven project for the sais-moves-web.  The SVN repository is:
    Code Block
    svn+ssh://svn.mit.edu/sais-sis-common/sais-moves-web/trunk
  2. Open the sais-moves-web maven project in your IDE.
    1. Open the sais-moves-web project pom.xml for editing.
    2. In the <dependencies> section, add the following dependency:
      Code Block
      <dependency>
    <groupId>edu.mit.maven.plugins</groupId>
    <artifactId>mit-release-plugin</artifactId>
    <version>2.0.21</version>
</dependency>
      Change the <version>, in the above, to the mit-release-plugin version that you selected in Section 1.
      The above dependency makes the source code for the mit-release-plugin available to the IDE's debugger.
    3. In the <dependencies> section, add the following dependency:
      Code Block
      <dependency>
    <groupId>edu.mit.maven.plugins</groupId>
    <artifactId>mit-release-plugin-common</artifactId>
    <version>[0.0.0,999.999.999)</version>
</dependency>
      Change the <version>, in the above, to the mit-release-plugin version that you selected in Section 1.
    4. In the <plugins> section of the pom.xml, find the following plugin with the following groupId and artifactId:
      NOTE  The version number may be differ from 2.0.21.
      Code Block
      <plugin>
    <groupId>edu.mit.maven.plugins</groupId>
    <artifactId>mit-release-plugin</artifactId>
    <version>2.0.21</version>
    .
    .
</plugin>
      Change the <version> for the above plugin to the mit-release-plugin version that you selected in Section 1.
    5. Open the log4j.xml (located in the resources folder) for editing and add the following <logger>:
      Code Block
      <logger name="edu.mit.moves.shell.logging">
    <level value="INFO" />
</logger>
      Tip
      titleOPTIONAL

      If you are only interested in debugging the mit-release-plugin, you might want to changed the <level> of all the other <logger>s to FATAL.  If you do this, all output to the system console will be surpress except for the output from the mit-release-plugin.

When you are satisfied that everything is correct, save the changes that you made.

The sais-moves-web Maven Project Reconfiguration is now complete

Panel

Anchor
The Moves Development Environment Setup
The Moves Development Environment Setup

Step 3: The Moves Development Environment Setup

  1. Download the following files:
    Warning

    The following 3 properties files are the be used solely and exclusively in the software development environment on an Educational Systems VM.  They are NOT to be deployed to the development, test or production servers.

    1. Click here to Download the sais-moves-web.properties file .  Select Save as to your ${user.home} directory.
    2. Click here to Download the sais-moves-web-build.properties file .  Select Save as to your ${user.home} directory.
    3. Open the sais-moves-web-build.properties file for editing and change the following properties:
      • mit.maven.release.plugin.version=2.0.21  Change the version number (2.0.21) to the mit-release-plugin version number that you selected in section 1.
      • maven.system.property.cargo.hostname=esvm-1xx.mit.edu  Change the hostname (esvm-1xx.mit.edu) to your vm's hostname.

  2. Configure your moves build directories
    1. Create the following directories:
      • C:\tmp\movesbuild\build\sais-common-conf\.m2\repository
      • C:\tmp\movesbuild\build\sais-common-conf\servers\oc4j
        Note

        Please note that the .m2 directory cannot be created using Windows Explorer.  To create the .m2 directory, you must open a cmd window, cd to the sais-common-conf directory and use mkdir to create the .m2 directory.

    2. Open a cmd window and cd to the C:\tmp\movesbuild\build\sais-common-conf\.m2 directory.  Type the following command:
      Code Block
      linkd repository c:\Users\esuser\.m2\repository
      The above command will link your local maven repository to the directory C:\tmp\movesbuild\build\sais-common-conf\.m2\repository.
      Warning

      Do not delete or rename the repository directory.  Deleting or Renaming the repository directory will delete your local maven repository.  Unlink the repository directory before you delete or rename.

      Tip

      You can unlink the repostory directory with the following command:

      Code Block
      linkd repository /D

      You must be in the .m2 directory when you execute the above command.

    3. Download and install the settings.xml (right click on this link then select Save target/link as....  Navigate to the .m2 directory you've just created and click Save)

      Open the settings.xml for editing and change the following:

      • Change the property value for <oc4j.j2eeHome> to:
        Code Block
        /oracle-oc4j-10.1.3.5.0-server/j2ee/home
      • Change the property value for <oc4j.password> to:
        Code Block
        oc4jadmin
    4. In a cmd window, cd to the C:\tmp\movesbuild\build\sais-common-conf\servers directory.  Type the following command:
      Code Block
      linkd oc4j c:\oracle-oc4j-10.1.3.5.0-server
      The above command will link your local oracle server to the directory C:\tmp\movesbuild\build\sais-common-conf\servers\oc4j.
      Warning

      Do not delete or rename the oc4j directory.  Deleting or Renaming the oc4j directory will delete your local oracle server.  Unlink the oc4j directory before you delete or rename.

      Tip

      You can unlink the oc4j directory with the following command:

      Code Block
      linkd oc4j /D

      You must be in the servers directory when you execute the above command.

  3. Configure your moves ui directories
    1. Create the following directories:
      • C:\tmp\movesbuild\ui\sais-common-conf\.m2\repository
      • C:\tmp\movesbuild\ui\sais-common-conf\servers\oc4j
        Note

        Please note that the .m2 directory cannot be created using Windows Explorer.  To create the .m2 directory, you must open a cmd window, cd to the sais-common-conf directory and use mkdir to create the .m2 directory.

    2. Open a cmd window and cd to the C:\tmp\movesbuild\ui\sais-common-conf\.m2 directory.  Type the following command:
      Code Block
      linkd repository c:\Users\esuser\.m2\repository
      The above command will link your local maven repository to the directory C:\tmp\movesbuild\ui\sais-common-conf\.m2\repository.
      Warning

      Do not delete or rename the repository directory.  Deleting or Renaming the repository directory will delete your local maven repository.  Unlink the repository directory before you delete or rename.

      Tip

      You can unlink the repostory directory with the following command:

      Code Block
      linkd repository /D

      You must be in the .m2 directory when you execute the above command.

    3. Download and install the settings.xml (right click on this link then select Save target/link as....  Navigate to the .m2 directory you've just created and click Save)

      Open the settings.xml for editing and change the following:

      • Change the property value for <oc4j.j2eeHome> to:
        Code Block
        /oracle-oc4j-10.1.3.5.0-server/j2ee/home
      • Change the property value for <oc4j.password> to:
        Code Block
        oc4jadmin
    4. In a cmd window, cd to the C:\tmp\movesbuild\ui\sais-common-conf\servers directory.  Type the following command:
      Code Block
      linkd oc4j c:\oracle-oc4j-10.1.3.5.0-server
      The above command will link your local oracle server to the directory C:\tmp\movesbuild\ui\sais-common-conf\servers\oc4j.
      Warning

      Do not delete or rename the oc4j directory.  Deleting or Renaming the oc4j directory will delete your local oracle server.  Unlink the oc4j directory before you delete or rename.

      Tip

      You can unlink the oc4j directory with the following command:

      Code Block
      linkd oc4j /D

      You must be in the servers directory when you execute the above command.

The Development Environment Setup is now complete

...