Getting Connected
1) Connect both USB mini-B type cables to the gumstix board (OTG and console ports)
...
You can also check that the vehicle has internet access by pinging some public IP. Alternatively if internet is not required, the interfaces can both be configured to static addresses on the same subnet.
5) Starting a mission
From the home folder you should see folders for leighton-extend and moos-ivp. Navigate to ~/leighton-extend/trunk/missions to find the default mission for the vehicle, vehicle.moos. If you start this mission and run uXMS you should see data being reported by the flight computer. Similarly host.moos is the default file you'll need to run on the host computer with the host-side XBee.
Software Sources
The two main software sources required are MOOS-IvP and the leighton-code svn, which can be found at https://code.google.com/p/leighton-code/. The leighton-code applications are currently only compatible with old-moos, and version 12.2 of MOOS-IvP is installed on the vehicle.