Model: [Angular Momentum and Angular Impulse] plus the [Work-Energy Theorem].
Approach: Gravity and the normal force are perpendicular to the motion of the object and so do no work. The only force capable of performing work on the object is the tension, which is equal to the force from the person pulling on the string. Thus, the work done by tension will equal the work done by the person. This work can be computed by finding the change in kinetic energy of the object, according to the [Law of Change] for our model:
{latex}\begin{large}\[ W = \Delta K\]\end{large}{latex}
Because the object can be considered to be moving in pure rotation about the center of the circle, we can compute its kinetic energy using the rotational formula:
{latex}\begin{large}\[ K = K_{\rm rot} = \frac{1}{2}I\omega^{2}\]\end{large}{latex}
For a point particle,
{latex}\begin{large}\[ I = mr^{2}\]\end{large}{latex}
and so:
{latex}\begin{large}\[ W = \frac{1}{2}m\left(r_{f}^{2}\omega_{f}^{2} - r_{i}^{2}\omega_{i}^{2}\right)\]\end{large}{latex}
{warning}Note that we have assumed the mass is constant, but we cannot assume the angular speed is constant. (The radius is clearly changing.){warning}
We already have the initial and final radius of the motion, but we do not yet have the angular speed. To find it, we consider the torque on the system. We choose the natural location for the axis by locating it at the center of the circle. With this choice, we can see that there is zero net torque on the system, since the [moment arm] for the tension is zero. With the net torque equal to zero, we are in the special case of constant angular momentum, so:
{latex}\begin{large}\[ I\omega_{f} = I\omega_{i} \]\end{large}{latex}
By using the formula for the moment of inertia of a point particle, we can show:
{latex}\begin{large}\[ \omega_{f} = \omega_{i}\left(\frac{r_{i}}{r_{f}}\right)^{2}\]\end{large}{latex}
Substituting into the work-energy theorem then gives:
{latex}\begin{large}\[ W = \frac{1}{2} mr_{i}^{2}\omega_{i}^{2}\left(\frac{r_{i}^{2}}}{r_{f}^{2}} - 1\right) =\mbox{13.5 J}\]\end{large}{latex}
h4. Method 2
System: The object as a [point particle] undergoing [pure rotation], acted upon by external forces from the string (tension), the earth (gravity) and the table (normal force).
Model: [Point Particle Dynamics], [Angular Momentum and Angu plus the definition of [work].
Approach: To move the object radially inward at constant speed, the tension force must simply provide the centripetal force.
{note}No _additional_ radial acceleration is needed, since the change in radius is at a constant rate.{note}
We therefore have:
{latex}\begin{large}\[ T = m\omega^{2} r \] \end{large}{latex}
Since, as discussed in Method 1 above, the only force that does work is the tension, we can now use the definition of work:
{latex}\begin{large} W = \[ \int_{r_{i}}^{r_{f}} \vec{T}\cdot d\vec{r} = - \int_{r_{i}}^{r_{f}} m\omega^{2}r\:dr\]\end{large}{latex}
{note}Note that the tension force points radially inward so that the dot product gives a negative sign.{note}
Before we can evaluate this integral, we must determine the dependence of ω on _r_.
|