...
- 3D Printer
- Sandpaper
- Acetone
- Wax
- Gloves (and optionally a mask)
- PVA release film
- Vacuum bag plastic
- Vacuum tape (double sided)
- 1x1" squares of heat resistant glass
- Glass scorer (Metropolis has some)
- Glass-breaking pliers (Metropolis has some)
- Thin-woven fiber glass sheet (Gelb Lab)
- Woven fiber glass sheet (Gelb Lab)
- 2-part epoxy resin
- Peel ply (Gelb Lab)
- Breather
- Vacuum pump
- Four (4) M2 screws
- Four (4) M3 or 1/8" screws and corresponding nuts
- Dremel with cutting and sanding wheels
Obtaining and 3D Printing the Negative Mold
...
Cutting the Aeroshell to the Proper Size *Conrad return to this 5/16/2024
Materials: Skeleton, four (4) M2 screws, Dremel with cutting and sanding wheels
Glass Pane
Materials: 1x1" square of heat resistant glass, marker, glass scorer, glass-breaking pliers, sandpaper
...