...
3x E-MATCH
5 MINUTE EPOXY
POPSICLE STICK GREEN CLAYSTICK
BLACK POWDER
BLUE TAPE
2x TENDER DESCENDER BODIES
...
Take a DRILLED & TAPPED 1/8 NPT PLUG (which has a 1/4-20 hole drilled and tapped through the middle) and thread a FIREBOLT into it using approximately 3 wraps of TEFLON TAPE.
Put two E-MATCHES through the hole in the 1/4-20 bolt and glue with 5 MINUTE EPOXY on the head end of the screw. You will need a POPSICLE STICK.
On the other end of the screw, you may be able to push a small amount of epoxy on, but don't get it in the plug's threads.Take some GREEN CLAY to further plug up the open end of the bolt.
Put a preselected amount of BLACK POWDER in a little packet of BLUE TAPE, with the e-match head inside of the packet.
...