...
Requirements:
-
Must withstand the force applied by the piston (60 lbs/bolt, 360 lbs total) [with minimal deformation, less than .1 mm]
-
Must fit within the airframe
-
Must be able to interface with mission package tube and structures below
-
Must be able to interface with piston
...
- Waterjet profile
- Leave holes slightly undersized
- Leave outer diameter slightly oversized
- Leave holes slightly undersized
- Clean up holes on the drill press
- Tap center hole and six surrounding holes
- Use piston as a fixture to turn outer diameter to final size
- Use piston as a fixture to drill and tap holes on the indexer
TBD - waiting to return to campus
...