...
Yes, that's right. You get to run light hang during Put-In. This basically means that you are in charge of the entire light plot - cables and all - being up on the pipes by the end of the day. As you are going through and hanging, keep track of what you hang and any changes you are making in a central location. This makes your LD much happier when they are patching.
You can't fully focus instruments until the stage is up (or at least taped out), but you can rough focus instruments in the general direction that the light plot indicates when you hang them. Also, OPEN THE SHUTTERS. This is so that you can actually see if the instrument is working during instrument check.
...