...
- Tilt the mill head to 15 degrees.
- Tram the vise perpendicular to the mill table.
- Clamp the LE in soft jaws that extend out beyond the vise.
- Secure the 1/4" Carbide End Mill in the machine.
- Set the speed to 5000 rpm and the feed to 5.4 ipm.
- Set the Z to the final dimension and work the Y in FDSF.090" per pass. (Five passes plus a finishing pass)
- Perform a .005" finishing pass.
- Flip the fin and machine the other side.
- Replace the end mill every 2-3 fins.
...