...
Used System 3000 epoxy. fin can jig needs to be improved --> make sure to space layers evenly, use top layer with smaller slits. Holes were slightly too small so was difficult to adjust
Bevelled fins by hand. In the future, do this using mill
AFTER root bond, attached phenolic LE to G10 fin core (did after root bond because phenolic wouldn't have fit in the fin can jig)
...
Make sure to do fillets right the first time because this time we had to fill them in again (using West systems + fast hardener + silica)
talk about scheduling!! also speed up to tacking w/ heat gun
Procedure:
3.0 Progression of the Carbon Fiber Cut-outs Design
...