...

Proprietary parts shall have a controlling document. For machined parts this will take the form of a drawing. The drawing may be made to a commercial standard such as ASME Y14.24. This document shall be committed to the SVN. This document shall retain the part number name with an appropriate file extension. Uploading a .pdf as well is strongly encouraged.

...

Proprietary parts shall have a controlling document. For some parts this takes the form of digital files such as .stl, .gcode, .amf, .dxf, .cam. This file shall be committed to the SVN. These files are usually specific to the machine that uses them. Caution should be taken when attempting to reuse these files. File types which do not explicitly encode the machine parameters, or require parameters to be set separately may have these parameters recorded separately. Files for digital manufacture shall be named with the part number and the appropriate file extension.

Fasteners

The team prefers even numbered UNC fasteners through #10 thread. Exceptions should be considered on a case by case basis. Fasteners should have a corrosion treatment, either plating or black oxide.