...
- Fiberglass
- West Systems 105 epoxy (resin + hardener)
- Phenolic microballoons
- POR 15 High-temp Heat Resistant Paint
- 400-grit sandpaper
- Small popsicle sticks
- Mixing boat for epoxy
- Dremel
- Worthington propane blowtorch (14.1oz)
- Arduino Uno
Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade): https://www.adafruit.com/product/269
K-type thermocouple: https://www.adafruit.com/product/270
Jumper wires
- Breadboard
- Test stand
- Calipers
- Mini scale
- Gloves, respirators
Below is the matrix for samples used in this thermal test. All samples measured ~2 x 2".
| 5-Layer Fiberglass | 10-Layer Fiberglass | |
|---|---|---|
| Control (West Systems epoxy) | ||
| 1/4" phenolic sheet | ||
| West Systems + Phenolic microballoons | ||
| West Systems + Cork microballoons | ||
| West Systems + High temperature paint | ||
| West Systems + Cotronics 4700 |
...