...
- Height = 4.5"
- Width = 17.1891"
Manufacturing Process:
- Cut pieces of fabric for main rectangle, lines rectangle, 8 flaps, and the bottom using dimensions and stencils (in deployment bag box)
- Sew hems on flaps by folding edges over twice
- Add grommets to flaps using arbor press
- Sew flaps to main and lines rectangles
- Notes: Try to keep overlap on the same side of the flaps so when they are sewed into a cylinder the overlaps line up. Since the width of the rectangles is slightly longer than four flaps + overlap, spread out the flaps to keep them even.
- Sew the two rectangles together with a piece of webbing on the outside to cover the seam.
- Ideally the line stow would also be sewed in between the rectangles but I forgot, oops
Line Stow Sewing Procedure
...