Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

REs: Please include instrumentation needs for your subteams as well as the components (electronic, or otherwise) that would support them. Ideally, the format at the bottom of the page should make this compilation easier to interpret. Please remember that this compilation is for the RE(s) that will head the design of the PCB, so it important that they know what components to place on the board and any supplementary parts revealed through datasheets.

Liquid Prop

Load Cell

  • 1

  • Requires an ADC and an amp  (ADS7950SBDBT (Texas Instruments))

  • Model #:

Pressure Tap

  • 3

  • Requires an ADC, preferably one with >=500 samples/second (higher sample rate for better thrust curve)

  • Model #:

Thermocouple

  • 6

  • Requires an amplifier (ADS7950SBDBT (Texas Instruments))

  • K-type

  • Model #:

Accelerometer

  • 1

  • Model #: ADXL1005 (Analog Devices)

Solid Prop

Load Cell
  • 1
  • Requires an ADC
  • Model #:
Pressure Tap
  • 1
  • Requires an ADC, preferably one with >=500 samples/second
  • Model #:
Thermocouple
  • 5
  • Requires an amplifier
  • K-type
  • Model #:

Payload

Load Cell
  • 1
  • Requires an ADC
  • Model #:
Accelerometer
  • 2
  • Requires an ADC, preferably 1 MHz sampling rate
  • Model #: ADXL1005 (Analog Devices)
Thermocouple
  • 5
  • Requires an amplifier
  • K-type
  • Model #: CHAL-015 (Omega)

...