...
- EPOXY MIXING INSTRUCTIONS HERE. Log the time.
- Only glue two FireBolts per mixing. If you try to do more than two the epoxy will start to set.
- Using a popsicle stick, place mixed5-minute epoxy on the head end of the screw. (HOW MUCH? WHERE?)
- Slide the FireBolt in. (HOW FAR?)
On the other end of the screw, you may be able to push a small amount of epoxy on, but don't get it in the threads. Log the time. (ELABORATE AND QUALIFY)
- WHAT SHOULD A GOOD FIREBOLT LOOK LIKE? (PHOTO) WHAT ARE THE EXCEPTABLE LIMITS FOR AIR POCKETS IN THE EPOXY? ARE THERE OTHER VERIFICATION STEPS?
- Let the epoxy dry for 10 minutes.
...