Purpose
FireBolts, a term coined by the Team, are 1/4-20 bolts with E-matches glued in. They are used in Tender Descender modifications and also to ignite pyrotechnically operated pistons on the Team.
...
- Secure the bolt in the chuck of a lathe (head end pointing outward).
- Using a 8-32 tap drill size (drill #29INSERT DRILL SIZE HERE), slowly drill through the bolt. Use coolant or oil to prevent overheating of the drill bit or part.
- During the initial production round, we used a speed of 400 RPM and a feed of about 0.001" per 1-2 seconds.
- Tap the hole with an 8-32 tap. (ELABORATE)
3. After removing the bolt from the chuck, secure it in a pair of pliers.
...