...

The proposed design is as follows, a honeycomb core inside of a G10 structure with a phenolic leading edge. This implies two critical adhesive joins, attaching the honeycomb to the G10 and attaching the Phenolic to the G10.

Open Questions

• Layup the center honeycomb to shape, or layup panel then cut Unknown User (hmturner@mit.edu)
• What adhesive to use between the honeycomb and G10
• How to bond the phenolic to the G10 (tongue and groove? adhesive? butt join?)
• Order of operations for assembly

Tabled Trades

• Geometry - use Hermes I
• Thickness - use Hermes I